NAC3MPB-I
Air tight chassis connector, B-type for power-out, flat tab terminals, M3 mounting holes
The PowerConŽ is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The PowerConŽ is a connector without breaking capacity, i.e. the PowerConŽ should not be connected or disconnected under load or live!
Features & Benefits
- Lockable 3-pole equipment (AC) connector with contacts for line, neutral and pre-mating safety ground.
- High current capacity, rated at 20A / 250V ac.
- Fast and easy locking system
- Extremely robust and reliable
- Excellent cable retention
- UL, C-UL recognized components
- VDE and SEV approved
| There are no technical infos for this product.(210_t2_700028548) |
| Product |
| Connector Type | PowerCon |
| Gender | male |
| Electrical |
| Contact resistance | ≤ 3 mΩ |
| Dielectric strength | 4 kVdc |
| Insulation resistance | > 0.1 GΩ (after damp heat test IEC 68-2-30) |
| Rated current per contact | 20 A |
| Rated voltage | 250 V |
| Mechanical |
| Lifetime | > 1000 mating cycles |
| Wiring | flat tabs for 3/16" (FASTON® 4.8 x 0.5 mm) or soldering |
| Locking device | Quick Lock |
| Mounting direction | front |
| Chassis shape | D |
| Mounting | Mounting holes with M3 threads |
| Material |
| Contact plating | 20 µm Ag |
| Contacts | Brass (CuZn39Pb3) |
| Locking element | Steel Ck67 |
| Shell | Polyamide (PA 6 30 % GR) |
| Environmental |
| Approvals | UL,VDE,Electroswiss |
| Flammability | UL 94 HB |
| Protection class | IP 20 (mated) |
| Savety requirements | EN/IEC 61984 |
| Solderability | Complies with IEC 68-2-20 |
| Temperature range | -30 °C to +80 °C |
| Optical |
| Mobile Cables |
| Coding | A-type for power outlet (color coding grey) |
|