NO2-4FDW-R


Chassis connector with Ruthenium plating, 4 solder contacts and 1 LC-Duplex feedthrough socket, waterproof acc. to IP65, front panel mount

The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.



Features & Benefits


Product
Connector TypeOpticalCon
Genderfemale
Electrical
Contact resistance < 7 mΩ
Dielectric strength 1,5 kVdc
Insulation resistance> 2 GΩ (initial)
Insulation resistance> 1 GΩ (after damp heat test)
Rated current per contact3 A
Rated voltage50 V (1)
Mechanical
Insertion force< 45 N
Withdrawal force< 45 N
Lifetime> 1000 mating cycles
Locking force1000 N
WiringSolder contacts
Locking devicePush-Pull
Mounting directionfront
Chassis shapeD
Material
Contact plating0.2 µm Au over 2 µm Ni
ContactsBronze (CuSn6)
InsertPolyamide (PA 6, PBT 30 % GR, PBT 50 % GR)
ShellZinc diecast (ZnAl4Cu1)
Shell platingRuthenium
Split sleeveceramics
Environmental
FlammabilityUL 94 HB
Protection classIP 65
SolderabilityComplies with IEC 68-2-20
Temperature range-30 °C to +80 °C
Optical
Fiber typeMultimode, Singlemode PC, Singlemode APC
Insertion loss< 0.5 dB / connection
Optical connectorLC-Duplex Feedthrough
Mobile Cables
(1)Not compatible to the SMPTE standard, suitable for indoor studio applications acc. IEC 60664-1 (pollution degree 1, over voltage category 1)