210_957555721,210_708555927,210_t2_696211210,210_t2_572511659,210_30117692,210_195059364,210_1257571552,,,
NO2-4FDW-1
Chassis connector with hard Nickel plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65, front panel mount
The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.
Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage. For detailed information ask for the White Paper "OpticalCon @ SMPTE Indoor Applications".
|
Features & Benefits
- Designed as feedthrough with automatic sealing shutter
- Shutter with silicone gasket protects optical connection from dust an dirt
- Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
- Accommodates standard LC connectors on the rear for simple installation
- Connection on the front side either by rugged OpticalCon® or standard LC connector
- Waterproof acc. to IP65 safety standard
- In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.
- Colour coding to identify fiber mode:
Multimode - black
Singlemode PC - blue
Singlemode APC - green
|
 |
|
|
|
|
