NBTB75CNN5


BNC tiny cable jack is based on the Neutrik?s Rear Twist® principe and is suitable for thin coaxial cables (2.5 ? 3.8 mm diameter). This cable jack endues the reliable bayonet locking which can be turned form the back so that there is less engaging torque. This guarantees easy access even in high density applications. The tiny cable jack is the perfect solution for extensions and Y-cables.

Like all Neutrik BNCs it offers a true 75 Ω design and is perfectly suitable for HD applications.

Suitable cables:
Draka 0.41/1.9 AF, Draka 753-1104, Draka 755-1101, Draka 755-1103, Extron BNC 5 HR(P) (Bulk)

Crimp size:
Pin: 1.6 mm (square)
Shield: 4.53 mm (hex)



Features & Benefits


Product
Connector TypeBNC 75 Ohm
Genderfemale
Electrical
Signal TypeHD,SDI,Video,AES/EBU,Composit,YUV,RGB,RGBH,RGBHV
Contact resistance ≤ 3 mΩ (inner)
Dielectric strength 0,75 kVdc
Impedance75 Ω
Insulation resistance> 5 GΩ
Rated voltage250 V
VSWR≤ 1.10 / > 26 dB up to 1 GHz
≤ 1.14 / > 24 dB up to 2 GHz
≤ 1.22 / > 20 dB up to 3 GHz
Mechanical
Cable O.D.3.1 mm
Cable retention force> 30 N (Center)
Crimp size4,53 Hex crimp (shield) acc. IEC 60803 (die designation C)
Crimp size1,6 Square crimp (pin) acc. IEC 60803 (die designation 2)
Insertion force< 25 N
Lifetime> 1000 mating cycles
Locking deviceBayonett
CableDraka 0.41/1.9 AF, Draka 753-1104, Draka 755-1101, Draka 755-1103, Extron BNC 5 HR(P) (Bulk)
Cable anchoringJacket crimping
Material
ContactsBronze (CuSn6), 0.2 µm AuCo over 2 µm NiP15 (Ground contact)
ContactsBrass (CuZn35Pb2), 0.2 µm AuCo (Center contact)
InsertTeflon PTFE
ShellBrass (CuZn39Pb3)
Shell platingOptalloy®
Environmental
Standard complianceIEC 6016908, MIL 348A
Temperature range-30 °C to +85 °C
Contact crimpabilityComplies with IEC 60803 and IEC 60352-2
Optical
Mobile Cables