NO2-4FDW-1
Chassis connector with hard Nickel plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65, front panel mount
The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.
Not compatible to SMPTE 344M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage. For detailed information ask for the White Paper "opticalCON @ SMPTE Indoor Applications".
Features & Benefits
- Designed as feedthrough with automatic sealing shutter
- Shutter with silicone gasket protects optical connection from dust an dirt
- Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
- Accommodates standard LC connectors on the rear for simple installation
- Connection on the front side either by rugged opticalCON or standard LC connector
- Waterproof acc. to IP65 safety standard
- In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.
- Colour coding to identify fiber mode:
Multimode - black
Singlemode PC - blue
Singlemode APC - green
| There are no technical infos for this product.(210_t3_1344991053) |
| Product |
| Connector Type | OpticalCon |
| Gender | female |
| Electrical |
| Contact resistance | < 7 mΩ |
| Dielectric strength | 1,5 kVdc |
| Insulation resistance | > 2 GΩ (initial) |
| Insulation resistance | > 1 GΩ (after damp heat test) |
| Rated current per contact | 3 A |
| Rated voltage | 50 V (1) |
| Ground contact | Faston 2.8 x 0.5 (soldering possible) |
| Mechanical |
| Insertion force | < 45 N |
| Withdrawal force | < 45 N |
| Lifetime | > 1000 mating cycles |
| Locking force | 1000 N |
| Wiring | Solder contacts |
| Locking device | Push-Pull |
| Mounting direction | front |
| Chassis shape | D |
| Material |
| Contact plating | 0.2 µm Au over 2 µm Ni |
| Contacts | Bronze (CuSn6) |
| Insert | Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR) |
| Shell | Zinc diecast (ZnAl4Cu1) |
| Shell plating | Optalloy® |
| Split sleeve | ceramics |
| Environmental |
| Flammability | UL 94 HB |
| Protection class | IP 65 |
| Solderability | Complies with IEC 68-2-20 |
| Temperature range | -30 °C to +80 °C |
| Optical |
| Fiber type | Multimode, Singlemode PC, Singlemode APC |
| Insertion loss | < 0.5 dB / connection |
| Optical connector | LC-Duplex Feedthrough |
| Mobile Cables |
| (1) | Not compatible to the SMPTE standard, suitable for indoor studio applications acc. IEC 60664-1 (pollution degree 1, over voltage category 1) |
|