opticalCON hybrid field cable
Assembled extra rugged hybrid cable with 2 multi-mode fibers and 4 x 0.75mm2 copper conductors, GFK strenght member and aramid yarn as cable retention. Low weight robust hybrid cable, only 78kg/km. Optimized design for OpticalCon termination. Most suitable for powered applications in audio and video use.
The OpticalConŽ cable connector accommodates a standard optical LC-Duplex connector in a ruggedized and durable all-metal housing. It features a push-pull locking mechanism and an excellent cable retention utilizing the aramid yarn. The optical connection is exceptional well protected against dirt and dust by an automatically operated sealing cover.
The cable connector comes pre-assembled and is not available as a single component. The cable with additional protection boot is available in different lengths and is packed either in a case, on drum or airspool.
Cable Cross Section
Features & Benefits
- Ruggedized and dirt protected fiber optic connection system
- Waterproof acc. to IP65 safety standard in mated condition
- Extra robust hybrid cable with 2 multimode fibers and 4 x 0.75 mm˛ copper wires
- Accommodates standard optical LC-Duplex connectors
- Cable connector features rugged all metal housing and heavy duty cable retention
- Excellent dust and dirt protection due to automatic sealing shutter with silicone gasket
- Reliable Push-Pull locking mechanism
- Easy to clean, no tools required
- Cable packed in case, on drum or air spool
| There are no technical infos for this product.(210_t3_1656851768) |
| Product |
| Connector Type | OpticalCon |
| Gender | male |
| Electrical |
| Contact resistance | < 7 mΩ |
| Dielectric strength | 1,5 kVdc |
| Insulation resistance | > 10 GΩ (initial) |
| Insulation resistance | > 1 GΩ (after damp heat test) |
| Rated current per contact | 6 A |
| Rated voltage | 50 V (1) |
| Mechanical |
| Cable retention force | 500 N |
| Insertion force | < 45 N |
| Withdrawal force | < 45 N |
| Lifetime | > 1000 mating cycles |
| Wire size | 4 x 0.75 mm² |
| Wire size | 4 x 18 AWG |
| Locking device | Push-Pull |
| Cable | 2M-4S75 |
| Material |
| Boot | Rubber (EPDM) |
| Bushing | Zinc diecast (ZnAl4Cu1) |
| Contact plating | 0.2 µm Au over 2 µm Ni |
| Contacts | Brass (CuZn39Pb3) |
| Insert | Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR) |
| Shell | Zinc diecast (ZnAl4Cu1) |
| Shell plating | Hard Nickel or Ruthenium |
| Strain relief | Polyacetal (POM) (brass) |
| Environmental |
| Flammability | UL 94 HB |
| Protection class | IP 65 |
| Solderability | Complies with IEC 68-2-20 |
| Temperature range | -25 °C to +75 °C |
| Optical |
| Insertion loss | < 0.5 dB / connection |
| Optical connector | LC-Duplex |
| Mobile Cables |
| Colour | black, matte |
| Core diameter | 50 µm |
| Cladding diameter | 125 µm |
| Jacker | PUR |
| Minimal bending radius | 10 cm |
| Number of fibers | 2 |
| Cable retention | Aramid yarn |
| Strength member | GFK |
| Weigth | 78 kg/km |
| Overal diameter | 8.9 mm |
| (1) | Not compatible to the SMPTE standard, suitable for indoor studio applications acc. IEC 60664-1 (pollution degree 1, over voltage category 1) |
|